mvBlueFOX-IGC
- Compact industrial camera series with USB 2.0
- High quality gray scale and color CMOS sensors
- 8 Mpixels onboard memory
- Hardware LUT 10 bit to 8 bit
- High dynamic range (HDR) pour certains types de capteurs
La caméra mvBlueFOX-IGC est basée sur la version monocarte très complète -MLC, et vise des applications OEM où l'encombrement et le coût doivent être optimisés. Une excellente qualité d'image, associée à une haute cadence de prise d'image la rendent idéale pour des applications embarquées. Le pilote ainsi que le FPGA se combinent efficacement pour réduire fortement l'occupation du CPU pendant la prise d'images.
| CMOS | mvBlueFOX | |||
|---|---|---|---|---|
| Modèle | -IGC200w | -IGC202b1 | -IGC202d1 | -IGC205 |
| Variante | G / C | G / C | G / C | G / C |
| G = Noir et Blanc | C = Couleur | |||
| Résolution de la surface sensible (largeur x hauteur en [pixels]) | 752 x 480 | 1280 x 960 | 1280 x 960 | 2592 x 1944 |
| Cadence d'acquisition maximum [Hz] | 90 | 24,6 | 24,6 | 5,8 |
| Binning | H+V (cadence 170 Hz) | H+V, AverageH+V (cadence inchangée) |
H+V, AverageH+V (cadence inchangée) |
H+V, 3H+3V, AverageH+V, Average3H+3V, DroppingH+V, Dropping3H+3V (cadence 22,7 Hz) |
| Type de transfert | Global | Global | Rolling | Rolling / Global Reset |
| Taille de capteur (en pouces) | 1/3" | 1/3" | 1/3" | 1/2,5" |
| Taille de pixel (largeur x hauteur en [µm]) | 6 x 6 | 3,75 x 3,75 | 3,75 x 3,75 | 2,2 x 2,2 |
| Mode de lecture du capteur | 6 µs - 460 ms | 10 µs - 4 s2 | 10 µs - 4 s2 | 10 µs - 1 s |
| Résolution ADC / Output | 10 bit → 10 / 8 bit | 10 bit → 10 / 8 bit | 10 bit → 10 / 8 bit | 10 bit → 10 / 8 bit |
| SNR | 40 dB | > 43 dB | > 38 dB | |
| DR (normale / HDR) | 55 dB / ≤ 110 dB | > 61 dB / | > 61 dB / ≥ 115 dB (variante noir et blanc) | > 70 dB / |
| Pipelined in continuous / triggered mode | Oui / Non | Oui / Non | Pas de trigger | Pas de trigger, seulement Reset |
| Sensibilité spectrale |  /  |
 / C |
 /  |
 /  |
| Fabricant du capteur | Aptina | Aptina | Aptina | Aptina |
| Référence du capteur | MT9V034 | MT9M021 | MT9M023 | MT9P031 |
1 The operation in device specific AEC/AGC mode is limited in (non continous) triggered modes. AEC/AGC only works while trigger signal is active. When the trigger signal is removed AEC/AGC stops and gain and exposure will be set to a static value. This is due to a limitation of the sensor chip.
2 Adjustable settings, real limits and increment depend on clock frequency / AOI size / Binning mode. Some cameras may only reach max. expose with with min. clock and max. AOI.
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|
|
|
|
|
|
|
| Part code | Article description |
|---|---|
| KS-MUSB2-AB | USB 2.0 connecting cable Mini-USB-B to USB-A, length up to 5m |
| KS-MUSB2-AB-AK90R | USB 2.0 connecting cable Mini-USB-B to USB-A, 90° bent right, length up to 5m |
| KS-MUSB2-AB-AK90U | USB 2.0 connecting cable Mini-USB-B to USB-A, 90° bent down, length up to 5m |
| KS-MUSB2-AB-LS | USB 2.0 connecting cable Mini-USB-B to USB-A, with lock screws, length up to 5m |
| KS-MUSB2-AB-LS SLK | USB 2.0 connecting cable Mini-USB-B to USB-A, with lock screws, suitable for drag chain, length up to 5m |
| KS-MUSB2-AB-LS-AK90U | USB 2.0 connecting cable Mini-USB-B to USB-A, with lock screws, Mini-USB-B 90° bent down, length up to 5m |
| KS-IGC-IO-BINDER | Pre-assembled cable for digital I/O's, Binder series 707, 4 pins, cable cutted, with screw locking, length up to 5m |
| KS-IGC-IO-BINDER-AK90 | Pre-assembled cable for digital I/O's, Binder series 707, 4 pins, cable cutted, 90° bent, with screw locking, length up to 5m |
| FILTER | Filters on demand |
| Lenses | Lenses on demand |
|
|
|
|
|
|
|
|
Dimensional drawing mvBlueFOX-IGC
Pilotes et applications pour Windows XP, Vista, 7 (mvIMPACT Acquire)
Pilotes et applications pour Linux 2.6 (mvIMPACT Acquire)
install_mvBlueFOX 14-05-2012 | 10.0 kB Linux Installer Skript für mvBlueFOX / Linux installer script for mvBlueFOX
Logiciels additionnels pour NeuroCheck, LabVIEW, DirectShow, VisionPro et Halcon
Since version 1.10.69, a DirectShow® driver is part of the mvIMPACT Acquire installation package.
Since version 1.10.85, an interface to VisionPro® (Cognex) will be installed automatically when installing an MSI based mvIMPACT Acquire driver package.
Since version 1.12.39, an interface to NeuroCheck 6 for the families mvBlueFOX and mvBlueCOUGAR will be installed automatically.
mvIMPACT Acquire bindings for HALCON are available on MVTec's website: http://www.halcon.de/download/
LabVIEW acquire-x86-1.6.7 09-03-2012 | 8,352.0 kB 32 Bit LabVIEW Binding ab Version 6.1 und größer / 32 Bit LabVIEW binding for LabVIEW 6.1 or greater
LabVIEW acquire-x86 64-1.6.7 09-03-2012 | 8,944.0 kB 64 Bit LabVIEW Binding für alle x64 LabVIEW-Builds / 64 Bit LabVIEW binding for all x64 builds of LabVIEW
LabVIEW acquire.history 01-03-2012 | 7.1 kB 32 Bit LabView Binding History-Datei / 32 Bit LabView binding history file
NCUSBmvBF 16-03-2012 | 262.7 kB 32 Bit NeuroCheck Binding / 32 Bit NeuroCheck binding
Die NCUSBmvBF Pakete sind nur für den Einsatz mit NeuroCheck 5.1 und die mvBlueFOX Familie geeignet. / The NCUSBmvBF packages are suitable for mvBlueFOX together with NeuroCheck 5.1 only.
NCUSBmvBF-x64 16-03-2012 | 340.0 kB 64 Bit NeuroCheck Binding / 64 Bit NeuroCheck binding
Die NCUSBmvBF Pakete sind nur für den Einsatz mit NeuroCheck 5.1 und die mvBlueFOX Familie geeignet. / The NCUSBmvBF packages are suitable for mvBlueFOX together with NeuroCheck 5.1 only.
NeuoCheck acquire.history 09-01-2012 | 4.2 kB NeuoCheck Binding History-Datei / NeuoCheck binding history file
Modèles à trois dimensions
To be able to watch or download the 3D models, you have to be registered or logged in.
Documentations
To be able to watch or download the manuals, you have to be registered or logged in.
Brochures commerciales
Modifications possibles sans préavis, date 04/2012