Carte d'acquisition PCI Express pour standard HD-SDI - mvHYPERION-HD-SDI-2

mvHYPERION-HD-SDI-2 - HD-SDI PCI Express® x4 frame grabber
  • Carte d'acquisition PCI Express® x4
  • Acquisition de deux signaux standards HD-SDI ou d'un seul signal 3G-SDI
  • Acquisition jusqu'à 2 signaux non standard HD/3G-SDI
  • Connecteur D-Sub 15HD pour les sorties sync triples, sorties numériques, l'alimentation continue caméra +12V, sortie RS485 (Half-Duplex)

La carte d'acquisition mvHYPERION-HD-SDI interface les caméras Haute Définition SDI. Le format bus PCI Express® x4  autorise une bande passante de capture jusqu'à 1GB/s. 2 caméras HD-SDI ou 1 camera 3G-SDI peuvent être acquises indépendamment et simultanément.

  • Sommaire
  • Matériel
  • Logiciel
  • Formats du signal supportés
  • Dom. d'application
  • Téléchargem.
Product mvHYPERION-HD-SDI-2
PCI Express® x4
Interfaces 2 channels with HD-SDI standard or 1 channel with 3G-SDI on BNC connector
RS485 interface for camera control, trilevel sync outputs,
dig I/0 and camera supply on high density D-Sub connector
Continuous data rate Approx. 620 MB/s
Peak data rate 1 GB/s
Payload size Up to 256 Bytes
Scan Progressive
Permissible ambient temperature 0 .. 45 °C
Permissible storage temperature -20 .. 70 °C
  • PCI Express® x4 interface
 
  • 2 channels with HD-SDI standard or 1 channel with 3G-SDI
  • Size (w x l): 111.1 x 155 mm
 
  • RS485 interface for camera control, tri-level sync outputs,
    dig I/0 and camera supply on high density D-Sub connector
 
   

Acquisition of 2 independent standard HD-SDI signals or one standard 3G-SDI signal

Max. channels Format Frequency (fps) Video timing / video data mapping Physical layer Data Comments
2 1080p 23.98, 24, 25, 29.97, 30 SMPTE ST 274 SMPTE ST 292-1 YUV4:2:2 (2x10Bit)  
1 1080p 50, 59.94, 60 SMPTE ST 425 / Level A SMPTE ST 424-1 YUV4:2:2 (2x10Bit) Only channel 0 supported; Firmware version >= 86 required.
2 720p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 SMPTE ST 296 SMPTE ST 292-1 YUV4:2:2 (2x10Bit)  
2 1080i/psf 50, 59.94, 60 SMPTE ST 274 SMPTE ST 292-1 YUV4:2:2 (2x10Bit) The host system puts the two fields together to one frame.

Acquisition of up to 2 non-standard HD/3G-SDI signals

Max. channels Format Frequency (fps) Video timing / video data mapping Physical layer Data Comments
2 1080p 23.98, 24, 25, 29.97, 30 SMPTE ST 274 SMPTE ST 292-1 Raw(2k), Raw(12Bit)  
2 1080p 50, 59.94, 60 SMPTE ST 425 / Level A SMPTE ST 424-1 Raw(12Bit) Firmware version >= 86 required.
1 1080p 50, 59.94, 60 SMPTE ST 425 / Level A SMPTE ST 424-1 Raw(2k) Only channel 0 supported; Firmware version >= 86 required.
1 1080p 50(100), 59.94(119.88), 60(120) SMPTE ST 425 / Level A SMPTE ST 424-1 Raw(2in1) Only channel 0 supported; Firmware version >= 86 required.
2 720p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 SMPTE ST 296 SMPTE ST 292-1 Raw(2k), Raw(12Bit)  
Application areas
mvHYPERION - application areas
Pilotes et applications pour Windows 7, 8.1 (mvIMPACT Acquire)

Depuis la version 2.10.1 de mvIMPACT Acquire, les "Merge Modules for mvIMPACT Acquire" sont disponibles en téléchargement séparé.
Pour cette raison, les pilotes sont plus petits. Les "Merge Modules" ont besoin pour créer des séquences de configuration privés avec les pilotes "mvIMPACT Acquire". Plus de détails sont disponibles dans le manuel mvIMPACT Acquire.

mvIMPACT_AcquireMergeModules 2.18.3.zip mvIMPACT_AcquireMergeModules 2.18.3.zip | 311,304.4 kB

mvIMPACT Acquire Merge Modules

mvHYPERION x86 2.18.3.msi mvHYPERION x86 2.18.3.msi | 34,432.0 kB

mvHYPERION 32 Bit Windows (7, 8.1, 10)

mvHYPERION x86_64 2.18.3.msi mvHYPERION x86_64 2.18.3.msi | 48,360.0 kB

mvHYPERION-CLm/-CLf 64 Bit Windows (7, 8.1, 10)

mvIMPACT Acquire.history mvIMPACT Acquire.history | 750.0 kB

mvIMPACT Acquire History-Datei / mvIMPACT Acquire history file

Versions antérieures des pilotes

Pilotes et applications pour Linux 2.6 - 3.x.x (mvIMPACT Acquire)
install mvHYPERION install mvHYPERION | 21.6 kB

Linux Installer Skript für mvHYPERION devices / Linux installer script for mvHYPERION devices

mvHYPERION x86_ABI2 2.18.3.tgz mvHYPERION x86_ABI2 2.18.3.tgz | 7,375.4 kB

mvHYPERION 32 Bit Linux

mvHYPERION x86_64_ABI2 2.18.3.tgz mvHYPERION x86_64_ABI2 2.18.3.tgz | 8,606.1 kB

mvHYPERION 64 Bit Linux

mvIMPACT Acquire.history mvIMPACT Acquire.history | 750.0 kB

mvIMPACT Acquire History-Datei / mvIMPACT Acquire history file

Versions antérieures des pilotes

Logiciels additionnels pour NeuroCheck, LabVIEW, DirectShow, VisionPro et Halcon

Since version 1.10.69, the DirectShow® driver is part of the mvIMPACT Acquire installation package.

Since version 1.10.85, an interface to VisionPro® (Cognex) will be installed automatically when installing an MSI based mvIMPACT Acquire driver package.

mvIMPACT Acquire bindings for HALCON are available on MVTec's website: http://www.halcon.de/download/

LabVIEW acquire-x86-1.6.8 LabVIEW acquire-x86-1.6.8 | 9,028.0 kB

32 Bit mvIMPACT Acquire Binding für LabVIEW ab Version 6.1 / 32 Bit mvIMPACT Acquire binding for LabVIEW 6.1 or greater

LabVIEW acquire-x86 64-1.6.8 LabVIEW acquire-x86 64-1.6.8 | 10,980.0 kB

64 Bit mvIMPACT Acquire Binding für LabVIEW ab Version 6.1 / 64 Bit mvIMPACT Acquire binding for LabVIEW 6.1 or greater

LabVIEW acquire.history LabVIEW acquire.history | 7.2 kB

32 Bit LabView Binding History-Datei / 32 Bit LabView binding history file

Documentations

Pour visualiser ou télécharger les manuels, vous devez être enregistré ou connecté.

Brochures commerciales
mvHYPERION-Series e 2016-07 MR mvHYPERION-Series e 2016-07 MR | 4,661.5 kB

Datenblatt / Datasheet mvHYPERION

Modifications possibles sans préavis, date 07/2014