USB 2.0 single-board camera with housing - mvBlueFOX-IGC

Get a free quote: +49 - 71 91 - 94 32 - 888

mvBlueFOX -IGC CMOS USB 2.0 single board cameras with housing

Compact industrial camera series with USB 2.0
High quality gray scale and color CMOS sensors
8 Mpixels on-board memory
Hardware LUT 10 bit to 8 bit
High dynamic range (HDR) for certain sensors

The mvBlueFOX-IGC module is a fully featured compact single-board camera with housing perfectly targeted for space and cost sensitive OEM applications. A superior image quality in combination with a very high frame rate make the camera ideally suited for embedded applications. The driver in combination with the FPGA represents a perfect team which reduces the PC load to a minimum.

Sensors
Hardware
Software
Accessories
Application areas
Dimensional drawing
Downloads

Ordering code sample: mvBlueFOX-IGC with CMOS 5.0 MPixel, color and rolling / global reset shutter: mvBlueFOX-IGC205C

Note: Not recommended for new designs.

CMOS	mvBlueFOX
Model	-IGC200w	-IGC202a	-IGC202b¹	-IGC202d¹	-IGC205
Model variant¹	G / C	G	G / C	G / C	G / C
Resolution	752 x 480	1280 x 1024	1280 x 960	1280 x 960	2592 x 1944
Mpixels	0.4	1.3	1.2	1.2	5.0
Max. frame rate [Hz]	93	25	24.6	24.6	5.8
Binning	H+V (frame rate 170 Hz)	H+V	H+V, AverageH+V (frame rate unchanged)	H+V, AverageH+V (frame rate unchanged)	H+V, 3H+3V, AverageH+V, Average3H+3V, DroppingH+V, Dropping3H+3V (frame rate 22.7 Hz)
Shutter type	Global	Rolling	Global	Rolling	Rolling / Global Reset
Sensor size	1/3"	1/2"	1/3"	1/3"	1/2.5"
Pixel size [µm]	6 x 6	5.2 x 5.2	3.75 x 3.75	3.75 x 3.75	2.2 x 2.2
Exposure time	6 µs - 460 ms³	100 µs - 10 s	10 µs - 4 s³	10 µs - 4 s³	10 µs - 1 s
ADC resolution / output	10 bit → 10 / 8 bit	10 bit → 10 / 8 bit	10 bit → 10 / 8 bit	10 bit → 10 / 8 bit	10 bit → 10 / 8 bit
SNR_max		42 dB	40 dB	> 43 dB	37.4 dB
DR (normal / HDR)	55 dB / > 110 dB	61 dB/ -	> 61 dB /	> 61 dB / ≥ 115 dB (gray scale version)	65 dB /
EMVA1288		G
Trigger (HW / SW)	Yes / Yes	Yes / Yes	Yes / No	Yes / No	Yes / Yes
Pipelined in continuous / triggered mode	Yes / No	Yes / No	Yes / No	Yes / No	Yes / No (Reset only)
Spectral sensitivity	/		/	/	/
Sensor manufacturer	Aptina	Aptina	Aptina	Aptina	Aptina
Sensor	MT9V034	MT9M001	MT9M021	MT9M034	MT9P031

¹ The operation in device specific AEC/AGC mode is limited in (non continous) triggered modes. AEC/AGC only works while trigger signal is active. When the trigger signal is removed AEC/AGC stops and gain and exposure will be set to a static value. This is due to a limitation of the sensor chip.

² G = Gray, C = Color, GE = Gray & Infrared Enhanced

³ Adjustable settings, real limits and increment depend on clock frequency / AOI size / Binning mode. Some cameras may only reach max. expose with with min. clock and max. AOI.

USB 2.0 interface (up to 480 Mbit/s)

ADC resolution: 10 bit / 12 bit

CMOS with full frame / rolling shutter

CS-mount or optional C-/S-mount

Pipelined global shutter / global reset rolling shutter

Horizontal and vertical average binning

Very high frame frequency up to 90 fps

AOI with horizontal and vertical step width of 2 pixels

8 Mpixels on-board memory for secure image transmission

Automatic gain control (AGC)

Hardware LUT 10 bit → 8 bit

Automatic exposure control (AEC)

Micro-PLC for real-time sequencing (HRTC)

High dynamic range mode

Digital I/O:
- 1/1 opto-isolated

Bus powered < 2.5 W

Connectors:
- Mini-B USB or USB header USB
- Header digital I/O

Size without lens (w x h x l): 39.8 x 39.8 x 16.5 mm

Low-light mode

Weight without lens: < 80 g

Several trigger modes

Permissible ambient temperature 5..55°C

Conformity: Immunity: EN 61000-6-2:2005; Emission: EN 61000-6-3:2007, FCC class B; RoHs; CE

mvIMPACT Acquire drivers for Windows® and Linux® (→ "Downloads")		Comes with free mvIMPACT Base library
DirectShow® driver		Comprehensive mvIMPACT SDK library for standard image processing tasks
Further supported third-party software on request		Wide range of third-party software support
		Plug and play

Part code	Article description
Filters	Filters on demand
Cables	To the cable selector
Lenses	To the lens selector
Lighting systems	To the lighting systems selector

Machine Vision		Surveillance
Security		Life science
Medical application		Automation

10 mm (C-mount)

5 mm (CS-mount)

X	8 mm (C-mount), 9.5 mm with max. Ø 20 mm

The dimensional drawings / sketches only contain reference values. For concrete technical drawings with tolerances or related 3D models, please contact our sales or support team.

Drivers and applications for Windows 7, 8.1, 10 (mvIMPACT Acquire)

Since version 2.10.1 of mvIMPACT Acquire the "Merge Modules for mvIMPACT Acquire" are available as a separate download.
For this reason the installation packages are smaller now. The Merge Modules are needed for private setup routines, which shall include mvIMPACT Acquire drivers. More details are available in the mvIMPACT Acquire manuals.

mvBlueFOX x86 2.26.0.msi | 46,504.0 kB

mvBlueFOX 32 Bit Windows (7, 8.1, 10)

mvBlueFOX x86_64 2.26.0.msi | 62,508.0 kB

mvBlueFOX 64 Bit Windows (7, 8.1, 10)

mvIMPACT Acquire.history | 814.1 kB

mvIMPACT Acquire History-Datei / mvIMPACT Acquire history file

Older driver versions

To be able to watch or download the drivers, you have to be registered or logged in.

Drivers and applications for Linux 2.6 .. 3.x.x (mvIMPACT Acquire)

install_mvBlueFOX | 26.8 kB

Linux Installer Skript für mvBlueFOX / Linux installer script for mvBlueFOX

mvBlueFOX x86_ABI2 2.26.0.tgz | 8,306.5 kB

mvBlueFOX 32 Bit Linux

mvBlueFOX x86_64_ABI2 2.26.0.tgz | 9,348.5 kB

mvBlueFOX 64 Bit Linux

mvIMPACT Acquire.history | 814.1 kB

mvIMPACT Acquire History-Datei / mvIMPACT Acquire history file

Older driver versions

To be able to watch or download the drivers, you have to be registered or logged in.

Drivers for ARM based embedded boards (mvIMPACT Acquire)

Requirements for the usage of the ARM driver:

- libc (glibc, eglibc or similar) version >= 2.15
- gcc version >= 4.6.3
- ARM hardware with armv7-a architecture
or newer, which supports the Thumb-2 instruction set

Getestete ARM-Geräte | 17.5 kB

Tested ARM devices | 17.4 kB

install_mvBlueFOX_ARM | 26.6 kB

ARM 32 Bit / 64 Bit Installer Skript für mvBlueFOX / ARM 32 bit / 64 bit Installer script for mvBlueFOX

mvBlueFOX ARMhf_gnueabi 2.26.0.tgz | 6,214.1 kB

Treiber-Paket für ARM Boards / Driver package for ARM boards (hard float)

mvBlueFOX ARMsf_gnueabi 2.26.0.tgz | 6,288.2 kB

Treiber-Paket für ARM Boards / Driver package for ARM boards (soft float)

mvBlueFOX ARM64_gnu 2.26.0.tgz | 6,396.5 kB

Treiber-Paket für ARM Boards 64 Bit / Driver package for ARM boards 64 bit

For Raspberry Pi (armv6):

Readme Raspbian | 1.3 kB

Readme für Raspbian (Raspberry Pi) / Readme for Raspbian (Raspberry Pi)

mvIMPACT Acquire ARM Raspbian 2.10.1 | 3,442.3 kB

Treiber-Paket für Raspberry Pi Embedded Boards / Driver package for Raspberry Pi embedded boards

Additional packages for NeuroCheck, LabVIEW, DirectShow, VisionPro and Halcon

Since version 1.10.69, a DirectShow® driver is part of the mvIMPACT Acquire installation package.

Since version 1.10.85, an interface to VisionPro® (Cognex) will be installed automatically when installing an MSI based mvIMPACT Acquire driver package.

Since version 1.12.39, an interface to NeuroCheck 6 for the families mvBlueFOX and mvBlueCOUGAR will be installed automatically.

mvIMPACT Acquire bindings for HALCON are available on MVTec's website: http://www.halcon.de/download/

LabVIEW acquire-x86-1.6.8 | 9,028.0 kB

32 Bit mvIMPACT Acquire Binding für LabVIEW ab Version 6.1 / 32 Bit mvIMPACT Acquire binding for LabVIEW 6.1 or greater

LabVIEW acquire-x86 64-1.6.8 | 10,980.0 kB

64 Bit mvIMPACT Acquire Binding für LabVIEW ab Version 6.1 / 64 Bit mvIMPACT Acquire binding for LabVIEW 6.1 or greater

LabVIEW acquire.history | 7.2 kB

32 Bit LabView Binding History-Datei / 32 Bit LabView binding history file

NCUSBmvBF | 264.2 kB

32 Bit NeuroCheck Binding / 32 Bit NeuroCheck binding

Die NCUSBmvBF Pakete sind nur für den Einsatz mit NeuroCheck 5.1 und die mvBlueFOX Familie geeignet. / The NCUSBmvBF packages are suitable for mvBlueFOX together with NeuroCheck 5.1 only.

NCUSBmvBF-x64 | 344.8 kB

64 Bit NeuroCheck Binding / 64 Bit NeuroCheck binding

Die NCUSBmvBF Pakete sind nur für den Einsatz mit NeuroCheck 5.1 und die mvBlueFOX Familie geeignet. / The NCUSBmvBF packages are suitable for mvBlueFOX together with NeuroCheck 5.1 only.

3D camera models

To be able to watch or download the 3D models, you have to be registered or logged in.

Manuals

mvBlueFOX technical manual (chm) | 5,224.0 kB

mvBlueFOX Technisches Handbuch / Technical Manual

Hinweis / Note

mvBlueFOX technical manual (pdf) | 4,543.0 kB

mvBlueFOX Technisches Handbuch / Technical Manual

mvBlueFOX technical manual (html)