Opening one of the 4 converters of the mvSIGMA-SQ in mvAcquireControl

mvAcquireControl, mvSIGMA-SQ

There is no special entry for a mvSIGMA-SQ"s converter in the list "Current Frame Grabber" of the mvAcquireControl"s register "Setup". So you have to choose the entry "mvSIGMA-SLC". The mvSIGMA-SLC is similar to the mvSIGMA-SQ"s converter. The mvAcquireControl recognizes automatically that it is a converter of a mvSIGMA-SQ and all 16 input channels of the mvSIGMA-SQ are available.
If nothing special is written in the used INI-File (as a rule grabber.ini ) the first decoder is opened which the driver finds in the pci slot table. If an other converter should be opened you have to modify the used INI-File as follows:
...
[MVSL]
...
SelBoard 1
...
InitBoard
...

Here the settings SelBoard 0 upto SelBoard 3 are valid. If there are more than one mvSIGMA-SQ"s are installed in one system the numbers are counted further on (SelBoard 4 upto SelBoard 7).

Back