Technical data
Table of Contents
- Dimensions and connectors
- 6-pin through-hole type shrouded header (RS232)
- 5-pin through-hole type shrouded header (USB)
- 2x 8-pin through-hole type shrouded header (Digital Inputs)
- 2x 8-pin through-hole type shrouded header (Digital Output)
- 2x 8-pin through-hole type shrouded header (Flash Interface)
- RJ45 10/100/1000 MBit Ethernet
- Power supply
- Components
Dimensions and connectors
| mvBlueLYNX-M7 | |
| Size without lens (w x l) | 120 x 120 mm |
6-pin through-hole type shrouded header (RS232)
| Pin. | Signal | I/O | Description |
| 1 | +5V | ||
| 2 | RxD | in | RS232 receiver |
| 3 | RTS | out | Ready-To-Send |
| 4 | TxD | out | RS232 transmitter |
| 5 | CTS | in | Clear-To-Send |
| 6 | GND | Ground |
Manufacturer: JST
Part number: B6B-PH-K
5-pin through-hole type shrouded header (USB)
| Pin. | Signal |
| 1 | Power (+ 5 V) |
| 2 | D- |
| 3 | D+ |
| 4 | GND |
| 5 (header) | GND |
Manufacturer: JST
Part number: B5B-PH-K
2x 8-pin through-hole type shrouded header (Digital Inputs)
| Pin. | Signal |
| 1 | Main Power (12-48VDC) |
| 2 | Main Power (12-48VDC) |
| 3 | GND |
| 4 | GND |
| 5 | In3 |
| 6 | In2 |
| 7 | In1 |
| 8 | In0 |
Manufacturer: JST
Part number: B8B-PH-K
2x 8-pin through-hole type shrouded header (Digital Output)
| Pin. | Signal |
| 1 | Main Power (12-48VDC) |
| 2 | Main Power (12-48VDC) |
| 3 | GND |
| 4 | GND |
| 5 | Out3 |
| 6 | Out2 |
| 7 | Out1 |
| 8 | Out0 |
Manufacturer: JST
Part number: B8B-PH-K
2x 8-pin through-hole type shrouded header (Flash Interface)
| Pin. | Signal |
| 1 | Flash Trigger (5V CMOS) |
| 2 | 3.3V/5V I2C Clock |
| 3 | 3.3V/5V I2C Data |
| 4 | Generic Out (5V CMOS) |
| 5 | Generic In (5V CMOS) |
| 6 | VCC 5V |
| 7 | Main Power (12-48VDC) |
| 8 | GND |
Manufacturer: JST
Part number: B8B-PH-K
Contact
| application wire | Q'ty / reel | ||
| mm2 | AWG # | Insulation O.D. mm (in.) | |
| 0.05 to 0.22 | 30 to 24 | 0.9 to 1.5 (.035 to .059) | 8,000 |
Manufacturer: JST
Part number: SPH-002T-P0.5S
Housing
| circuits | dimensions in mm (in.) | Q'ty / box | |
| A | B | ||
| 4 | 6.0 (.236) | 9.8 (.386) | 1,000 |
| 12 | 22.0 (.866) | 25.8 (1.016) | 1,000 |
Manufacturer: JST
Part number: PHR-4 / PHR-12
RJ45 10/100/1000 MBit Ethernet
| Pin. | Signal | I/O | Comment |
| 1 | TX1+ | out | primary Tx pair |
| 2 | TX1- | out | |
| 3 | RX1+ | in | secondary Tx+ |
| 4 | TX2+ | out | secondary Tx pair |
| 5 | TX2- | out | |
| 6 | RX1- | in | secondary Tx- |
| 7 | RX2+ | in | secondary Rx pair |
| 8 | RX2- | in |
Power supply
| Pin. | Signal |
| 1 | MainPower |
| 2 | MainPower |
| 3 | GND |
| 4 | GND |
Manufacturer: Lumberg
Part number: MSFN 2.5mm
Components
| Feature | mvBlueLYNX-M7xx -G/-C | |
| Processor | CPU | PowerPC Motorola MPC8343 |
| CPU Clock | 400 MHz | |
| Operating system | Linux Kernel v2.6.26-rc6 | |
| Memory | DDR2-RAM | 512 MB, 32-Bit / 133MHz @ CPU |
| NorFlash | 8 Mbytes used for Bootloader, Linux-Kernel, rescue file system | |
| NandFlash | 64 Mbytes | |
| Real-Time clock | yes | |
| Battery | yes | |
| FPGA custom usage | optional | |
| Temperature sensor | yes | |
| Status LEDs | Power / LAN / FPGA | |
| Interfaces | ||
| RS232 (HW-Handshake) | 2 | |
| LAN 10/100/1000 ports | 2 | |
| Dig I/O 5V CMOS | 8 / 8 | |
| Dig I/O connector | Header | |
| USB 2.0 Host | 4 | |
| miniPCI Type-III slot | 1 | |
| SD-/SDHC-Card slot | 1 | |
| I2C | 2 | |
| Sensor ports via FPC51 | 2 | |
| Flash interface with power supply (+5V, I2C, Trigger and 1 DigIn and DigOut) | 2 | |
| Power | Supply VDC | 12-48 |
| Consumption | 6-8 W + peripherals | |
| Environment | ||
| Ambient Temperature | ||
| Performance | 0..50 C | |
| Weight without sensor heads | approx. 171 g | |
| Board size | mm | 120 x 120 |
